This tutorial lists steps on how to install TWRP Recovery and Root YU Yutopia YU5050
YU Yutopia is the latest CyanogenMod Smartphone from YU Televentures and the device packs high-end specs like Quad HD display, 4GB RAM, Snapdragon 810 Processor, 128GB microSD card slot etc. Earlier we have shared a tutorial on how to unlock bootloader on YU Yutopia and today we are going to share a tutorial on how to install TWRP Recovery and Root YU Yutopia YU5050.
Rooting YU Yutopia doesn’t voids it’s warranty and so can be carried out without any fear, but still you need to be careful otherwise you will end up bricking your device. So we recommend you to follow all the preparation steps before proceeding with installing TWRP Recovery and Rooting YU Yutopia YU5050.
- Charge YU Yutopia to at least 75%.
- Enable USB Debugging from Developer Options and disable “update Cyanogen Recovery option”.
- Backup all the important and stuff to safe place.
Backup and Restore SMS
Backup and Restore Contacts
Backup and Restore Call Logs
- Download and install Required Yutopia USB Drivers on PC.
- Setup ADB and Fastboot drivers on PC.
- Unlock Bootloader on YU Yutopia YU5050.
Disclaimer: All the steps listed below should be followed at your own risk and we are not responsible for any damage to your YU Yutopia. Proceed at your own risk.
TWRP Recovery for YU Yutopia – Link
SuperSU package – Link
How to install TWRP Recovery on YU Yutopia:
Step 1: Download the required files from the above downloads section to PC.
Step 2: Copy the TWRP recovery image to Fastboot folder and press and hold the shift key and right click inside the folder at the blank space and choose open command window here.
Step 3: Power off YU Yutopia and boot into Fastboot Mode.
- Connect one end of the USB to PC
- Press and hold the Volume Up key of Yutopia and connect it to PC.
Still didn’t get it? Watch the video here.
Step 4: Now in CMD type the below commands to install TWRP Recovery on YU Yutopia.
fastboot –i 0x2A96 devices
This command shows the list of devices connected to PC in Fastboot Mode.
fastboot –i 0x2A96 flash recovery recovery.img
This command flashes the recovery.img file to Yutopia.
fastboot –i 0x2A96 reboot
This commands reboots YU Yutopia to normal mode.
How to Root YU Yutopia YU5050:
Step 1: Download and Copy the SuperSU zip package to device’s storage.
Step 2: Boot YU Yutopia into Recovery Mode.
- Power off YU Yutopia.
- Press and hold Volume Down, Volume Up and Power buttons together until you are in Recovery Mode.
Still confused? Watch video here.
Step 3: From Recovery Mode flash the SuperSU zip package. How? Follow the guide here.
Step 4: Reboot YU Yutopia.
Step 5: Check for Root permissions using Root Checker App.
That’s it, now you have successfully installed TWRP Recovery and Rooted YU Yutopia YU5050. Do let us know in the comment section if you face any issues while installing TWRP Recovery and Rooting YU Yutopia.
Consider sharing this tutorial with your friends and let them know how to install TWRP Recovery and Root YU Yutopia YU5050.
Ads by Yahoo