How to Install CWM / TWRP Recovery on Galaxy S6 Edge and Galaxy S6 – All Models

Herein checkout how to install CWM / TWRP Recovery on Galaxy S6 Edge and Galaxy S6 all models – Complete guide

Earlier we have shared several tutorial on Samsung Galaxy S6 and Galaxy S6 Edge which includes Rooting tutorials, Fix Deep Sleep issue guide, how to use quick connect feature, unbrick / unroot Galaxy S6 and Galaxy S6 Edge etc. and today we are going to guide you with how to install CWM / TWRP Custom Recovery on Galaxy S6 Edge and Galaxy S6. This tutorial covers almost all the models of Galaxy S6 Edge and Galaxy S6.

So without any further ado let’s proceed to install CWM / TWRP Recovery on Galaxy S6 and Galaxy S6 Edge Android smartphones.

Early Preparations:

1. This tutorial is only for Galaxy S6 and Galaxy S6 Edge, don’t try it on other devices.
2. Backup all of your important data to safe place, so that if anything goes wrong you can recover your data.
3. Enable USB Debugging on Galaxy S6 / Galaxy S6 Edge from Developer Options.
4. Ensure that Galaxy S6 / Galaxy S6 Edge is charged to at least 75% before you proceed to install the Custom Recovery.
5. Download the required Samsung USB Drivers on PC.
6. Backup EFS data.

Disclaimer: We don’t force you to follow the procedure listed below and we are not responsible for any damage to your Galaxy S6 and Galaxy S6 Edge. Proceed with the below steps at your own risk.

How to install CWM / TWRP Recovery on Galaxy S6 Edge and Galaxy S6 all models:

Step 1: Download the CWM / TWRP Recovery suitable for your device from here, make sure to download the .tar file.

Step 2: Download the Odin Flash Tool and run it as administrator.

Step 3: Boot Galaxy S6 / Galaxy S6 Edge to Download Mode.

• Power off Galaxy S6 / Galaxy S6 Edge.
• Hold Volume Down, Home and Power buttons simultaneously until you see warning message.
• Press the Volume Up button to boot into Download Mode.

Step 4: Connect Galaxy S6 / Galaxy S6 Edge to PC using the OEM data cable.

Step 5: Follow the instructions listed here and install CWM / TWRP Recovery package on Galaxy S6 Edge / Galaxy S6.

Step 6: Reboot your device and confirm the successful installation by booting Galaxy S6 / Galaxy S6 Edge into Recovery Mode, by pressing and holding Volume Up, Home and Power buttons simultaneously until Samsung Logo appears.

That’s all now you have successfully installed CWM / TWRP Recovery on Galaxy S6 Edge and Galaxy S6 Smartphone almost all models. Do share this tutorial with your friends and family and let them know how to install TWRP Recovery on Galaxy S6 Edge and Galaxy S6.

Have any queries? Do share them in the comment section below.