,

Install Stock Firmware on Galaxy S8 and Galaxy S8 Plus [Unbrick, Fix Bootloop, Unroot]

Herein Download and Install Stock Firmware on Galaxy S8 and Galaxy S8 Plus to unbrick the device, fix Bootloop and Unroot etc.

Earlier we have shared a complete guide on how to install TWRP Recovery and Root Galaxy S8/ Galaxy S8 Plus. And if you have bricked your device while following those tutorials then you can follow this tutorial to unbrick Galaxy S8 and Galaxy S8 Plus. In this tutorial, we are going to install Stock Firmware on Galaxy S8 and Galaxy S8 Plus devices. Installing Stock Firmware back on Galaxy S8 Plus and Galaxy S8 will fix Bootloop issues, unbrick the device and unroot it.

Install Stock Firmware on Galaxy S8 and Galaxy S8 Plus [Unbrick, Fix Bootloop, Unroot]

After you have installed the Stock Firmware on Galaxy S8 Plus or Galaxy S8 you can use your device as a brand-new smartphone. So, without any further discussion let’s proceed to the steps on how to unbrick Galaxy S8 and S8 Plus.

Also See: How to SIM Unlock Galaxy S8 and Galaxy S8 Plus

Preparations:

  1. This tutorial is only for Galaxy S8 and Galaxy S8 Plus Smartphones.
  2. Install Samsung Galaxy S8/S8 Plus USB Drivers on your PC.
  3. Charge your device to at least 65-70%.

Disclaimer: We are not responsible for any damage to your device. Proceed with the steps listed below at your own risk.

Downloads:

Galaxy S8 Stock Firmware – SM-G950F | SM-G950N | SM-G950U | SM-G950W

Galaxy S8 Plus Stock Firmware – SM-G955F | SM-G955N | SM-G955U | SM-G955W

Odin Flash Tool


Best Deals on Amazon - Today!


How to Install Stock Firmware on Galaxy S8 Plus and Galaxy S8:

Step 1: Run Odin.exe as administrator on PC.

Step 2: Extract the downloaded firmware package to obtain .tar or .md5 file.

Step 3: Power off Galaxy S8/S8 Plus and boot into Download Mode by pressing and holding Volume Down + Bixby + Power buttons together.

Step 4: Connect your device to PC using OEM USB Cable.

Step 5: After successful connection, you should see Added! Message in Odin Software.

Step 6: Click on AP or PDA and choose the firmware package.

Step 7: Under Options tab, check only F.Reset Time and uncheck remaining all other options.

Step 8: Click on Start button to begin the flashing process.

Step 9: Once the flashing process is successful you should see PASS! message on Odin.

Step 10: Disconnect your device and reboot it.

Note: The first boot might take some time. So, please be patience and let the device boot up successfully.

With this, you have successfully unbricked your Galaxy S8 Plus/ Galaxy S8. If this tutorial was helpful, then don’t forget to share it with your friends on Facebook, Twitter and Google Plus etc.

Have any questions? Ask them in the comment section below.


🡇🡇 Latest Video on YouTube 🡇🡇

Written by

Alpesh

Tech Lover, Gadget Freak and the founder of Gizmo Advices who loves to play with Custom ROM's, Kernel's etc.

Leave a Reply

Your email address will not be published. Required fields are marked *

Human Verification: In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.


SIM Unlock Galaxy S8 and Galaxy S8 Plus

How to SIM Unlock Galaxy S8 and Galaxy S8 Plus

How to Enable Dual Speaker on Galaxy S8 and S8 Plus

How to Enable Dual Speaker on Galaxy S8 and S8 Plus