This tutorial shows how to Boot OnePlus 2 into Recovery Mode and Fastboot Mode – Complete Tutorial
OnePlus 2 is the latest Android Smartphone from OnePlus and is the company’s second Android Smartphone after OnePlus One. Similar to OnePlus One, we should have an invite to grab this device and as of writing this article more than 3 million people have registered for an invite. This clearly shows how successful the device is and how people are curious about it.
In this informative tutorial we are going to show you how you can Boot OnePlus 2 into Recovery Mode and Fastboot Mode. Both these modes are used for developing purposes and also can be used for recovering your device from any software issues or soft bricks.
So without any further ado let’s proceed and see how to Boot OnePlus 2 into Recovery Mode and Fastboot Mode.
There are two methods to Boot OnePlus 2 into Recovery Mode and Fastboot Mode and we will guide you with both of them one by one.
Method 1: Using Hardware Keys.
Boot OnePlus 2 into Recovery Mode using Hardware Keys:
To boot OnePlus 2 into Recovery Mode just press and hold the Volume Down and Power buttons until you see anything on the screen or you feel haptic feedback.
Boot OnePlus 2 into Bootloader / Fastboot Mode using Hardware Keys:
To boot OnePlus 2 into Fastboot / Bootloader Mode, press and hold the Volume Up and Power buttons until you see Fastboot Mode written on the screen.
Method 2: Using ADB Commands:
Before you proceed with this method make sure you have Enabled USB Debugging from Developer Options and also have installed OnePlus USB Drivers and ADB and Fastboot drivers on PC. Once you are all set with the above conditions you can follow the below steps.
Boot OnePlus 2 into Recovery Mode using ADB Command:
Connect your OnePlus 2 to PC using USB cable and Open Command window inside the Fastboot folder. If you have installed the ADB and Fastboot drivers system wide on your PC then you can just open the command window. If you haven’t installed it System wide, then open the Fastboot folder and press and hold Shift key and right click inside the Fastboot folder at empty space and choose open command window here. Now in CMD Type below command and hit enter.
adb reboot recovery
Boot OnePlus 2 into Fastboot / Bootloader Mode using ADB Command:
To boot OnePlus 2 into Bootloader / Fastboot mode just enter the below command in the CMD and hit enter:
adb reboot bootloader
We hope this tutorial was helpful and if it is then consider sharing it on Facebook, Twitter, Google Plus and other social networking sites and let other know how to Boot OnePlus 2 into Recovery and Fastboot Mode.
Ads by Yahoo